Centrifuges

High-speed bench-top centrifuge for hematocrit determinations with brushless frequency drive. At 16.060 g sedimentation is completed in just a little over 6 minutes.

The HC-240 centrifuge includes a segmented hematocrit rotor for 24 capillaries. With the segmented hematocrit rotor every capillary has its own chamber. If a capillary breaks, the fragments stay in this chamber or segment without affecting other capillaries.

The lid of the rotor is evaluation disc and cover in one.
The hematocrit value can be read off the lid/evaluation disc right after centrifugation.

Controls and displays

• During centrifugation the actual values of the parameters are indicated
• The centrifuge’s speed and running time can be variably adjusted for different applications.
• Speed display in RPM or RCF
  RPM input from 200 to 10.000 in steps of 10, starting from 10.000 to the maximum speed in steps of 100
  RCF input from 200 to 10.000 in steps of 1, starting from 10.000 to the maximum speed in steps of 10
• Time t/min: 1 - 99 min. in steps of 1 min.,
  Time t/sec: 1 - 59 sec. in steps of 1 sec.,
  Continuous operation
• Brake stage, selectable between fast and slow
• Pulse key: For short centrifugation operations
• Open lid key

Safety

• Lid locking and holding device
• Emergency lid lock release
• Lid closure of metal
• Imbalance switch-off
• Flexible motor bearings
• Deep metal rotor chamber (die-cast-aluminium) to securely accomodate the rotor

Design

• Smooth plastic housing, easy to clean
• Metal lid
• Deep metal rotor chamber

The HC-240 conforms to safety regulations such as IEC 61010, or the CE mark and all relevant EC standards and DIN norms and has been manufactured under ISO 9001:2008

BOECO CENTRIFUGE S-8
Practical and handy the S-8 is the ideal centrifuge for small sample volumens. It is supplied with a 8-place angle steel rotor, which accomoda-tes various tube systems as well as 15 ml glass tubes without adapters. The centrifuge is microprocessor controlled

Controls and displays

• During centrifugation the actual values of the parameters are indicated
• The centrifuge’s speed and running time can be variably adjusted for different applications:
• Speed display in RPM or RCF
• RPM input from 200 to the maximum speed in steps of 10
• RCF input from 200 to the maximum speed in steps of 1
• Time t/min: 1 - 99 min. in steps of 1 min.,
  Time t/sec: 1-59 sec. in steps of 1 sec.,
  Continuous operation
• Brake stage, selectable between fast and slow
• Pulse key: For short centrifugation operations
• Open lid key

Safety

• Lid locking and holding device
• Emergency lid lock release
• Lid closure of metal
• Imbalance switch-off
• Flexible motor bearings
• Deep metal rotor chamber (die-cast-aluminium) to securely accomodate the rotor

Design

• Smooth plastic housing, easy to clean
• Metal lid
• Deep metal rotor chamber

The SC-8 conforms to safety regulations such as IEC 61010, or the CE mark and all relevant EC standards and DIN norms and has been manufactured under ISO 9001:2008

with fixed Angle Rotor for 6x15ml centrifuge tubes (17x100/120mm),
3 adapters sets,
black adapters Ø13x78mm for10ml/7ml/5ml blood collection tubes and
white adapters Ø13x63mm for 4ml/3ml/2ml blood collection tubes,
green adapters Ø11x78mm for 2,0/1,5ml microtubes tubes,
Power Supply AC 100-240V, 50-60Hz, Manual

• Maintenance-free brushless motor
• LCD Display of time and speed
• Adjustable speed from 300 rpm to 5000 rpm
• Time, from 15 s to 99 min.
• Lid automatically opens at the end of the run to prevent sample warming and to reduce handling time
• Two program button P1/P2 for easy access to routine programs
• Button rpm/rcf for easy switching between RPM and RCF display
• Automatic rotor imbalance detection

The BOECO SC-6 is a small centrifuge with a swing-out rotor especially designed for use in clinical laboratories and medical practices.
It accepts common blood or urine tubes up to a volume of 15 ml and accelerates them to a maximum speed of 4,000 rpm--1

The BOECO SC-6 delivers optimal separation results and a horizontal layer of the separating gel that is identical to that achieved with a large centrifuge. Samples are therefore optimally prepared for analysis.

Controls and displays

• During centrifugation the actual values of the parameters are indicated
• The centrifuge’s different applications.
• Speed display in RPM x 100, input in steps of 100
• Time t/min: 1 - 99 min, continuous operation
• Pulse key: For short centrifugation operations
• Open lid key

Safety

• Lid locking and holding device
• Centrifuge chamber of stainless steel
• Emergency lid lock release
• Lid closure of metal
• Imbalance switch-off
• Flexible motor bearings

Design

• Smooth plastic housing,
• easy to clean
• Metal lid
• Stainless steel centrifuging chamber, deep-drawn and seamless

The SC-6 conforms to safety regulations such as IEC 61010, or the CE mark and all relevant EC standards and DIN norms and has been manu-factured under ISO 9001:2008

The non-refrigerated microprocessor-controlled C-28 A is the ideal bench-top centrifuge for performing daily routine tasks in doctors’ laboratories and small hospitals. But because of the wide range of accessories the C-28A can also be used for sample preparation in research and industrial laboratories.
The centrifuge has a brushless frequency drive (no carbon brushes).
A special locking device allows effortless opening and closing of the lid with just one hand.

Controls and displays

• During centrifugation the actual values of the parameters are indicated
• Entry of the running parameters via water-protected foil keypad
• Speed display in RPM x 100, input in steps of 100
• Time t/min: 1 - 99 min, continous operation
• Impulse key: For short centrifugation operations

Safety

• Housing and lid of metal finished in a scratch and impact resistant coating
• Centrifuge chamber of stainless steel
• Lid locking and holding device
• See-through glass in the lid
• Emergency lid lock release
• Imbalance switch-off
• Easily exchangeable rotors
• Automatic rotor recognition

The C-28 A conforms to safety regulations such as IEC 61010 or the CE mark and all relevant EC standards and DIN norms and has been manufactured under ISO 9001:2008

• Controls and displays
• During centrifugation the actual values of the parameters are indicated
• Entry of the running parameters via foil keypad
• Speed display in RPM x 100, increment 100 rpm
• Time t/ min: 1 - 30 min, increment 1 min
• Open lid key
• Safety
• Lid locking and holding device
• Emergency lid lock release
• Metal protective inserts and enclosures inside the body
• See-through glass in the lid
• Imbalance switch-off

• Controls and displays
• During centrifugation the actual values of the parameters are indicated
• Entry of the running parameters via foil keypad
• Speed display in RPM or RCF
• RPM input from 200 to 10.000 in steps of 10, starting from 10.000 to the maximum speed in steps of 100
• RCF input from 200 to 10.000 in steps of 1, starting from 10.000 to the maximum speed in steps of 10
• Time t/min: 1 - 99 min. in steps of 1min., Time t/sec: 1-59 sec. in steps of 1 sec., Continuous operation
• Brake stage, selectable between fast and slow
• Pulse key: For short centrifugation operations
• Open lid key
• safety
• Lid locking and holding device
• Emergency lid lock release
• Motor overheating protection A Imbalance switch-off
• Deep metal rotor chamber (die-cast-zinc) to securely accomodate the rotor

Even thermosensitive samples can be gently centrifuged thanks to highly reliable refrigeration. Best separation results are guaranteed with the smooth-running, high-performance motor featuring a maintenance-free frequency drive. With the optional autoclavable and aerosol-tight accessories, even infectious materials can be processed safely for both the user and the environment.

User-Friendliness

• Automatic lid locking
• Quick-entry foil keypad
• Easy-to-read, digital display
• Display of current parameter values
• Select key for parameter selection
• Impulse key for short centrifuging
• Open lid key
• RCF key
• Twist knob to enter values
• RPM in increments of 10
• Running time in minutes, max. 99 min
• Temperature in increments of 1°C (M-240R)
• 4 programmable memories

Refrigeration (M-240R)

• Infinitely variable setting from –10 °C to +40 °C
• Fast Cool function in 10 - 15 min to +4 °C
• Stand-by mode maintains the set temperature
• Automatic refrigeration switch-off when the lid is opened

Safety

• Lid dropping protection
• Lid locking and holding
• Emergency lid lock release
• Motor overheating protection
• Chamber overheating protection
• Imbalance switch-off
• Standstill indication
• with the refrigerated model M-240R the LED in the Open key lights up with the M-240 the lid opens automatically after the rotor has come to a standstill

The M-240 / M-240R conform to safety regulations such as IEC 61010, all relevant EC standards and DIN norms and have been manufactured under ISO 9001:2008

Because of their comprehensive range of accessories, the U-320 and U-320R centrifuges are the perfect universal centrifuges for routines in basic research and R&D laboratories of the pharmaceutical and biotechnical industry. The microprocessor controlled centrifuges have a brushless frequency drive (no carbon brushes) and a motorized lid locking.

Performance

• High RCF
• Extremely short run-up and run-down times

Design

• Metal housing, Metal Lid
• Stainless steel centrifuging chamber
• Viewing port in the lid

Refrigeration (U-320R)

• Infinitely variable setting from –20 °C to +40 °C
• Fast Cool function

User-Friendliness

• Automatic lid locking
• Emergency lid-lock release
• Easily exchangeable rotors
• 10 programmable memories
• 9 acceleration and braking ramps, or unbreaked run-up or-run down time

Safety

• Lid locking and holding during rotor run
• Emergency lid lock release
• Motor overheating protection
• Chamber overheating protection (with U-320R)
• Imbalance switch-off
• Automatic rotor recognition
• Lid dropping protection

Controls and displays

• During centrifugation the actual values of the parameters are indicated
• Change-over RPM/RCF: by entering the rotor radius r/mm the Centrifuge
• will calculate/indicate speed or RCF.
• Time preselection in steps of minutes and seconds /
• Continuous operation
• Temperature T/°C: Input in increments of 1°C
• Impulse key: For short centrifugation operations

The U-320 / U-320R conform to safety regulations such as IEC 61010 or the CE mark and all relevant EC standards and DIN norms and have been manufactured under ISO 9001:2008

Swing-out rotor, 4-place, n= 4,000 min^-1, max. RCF 2,665, max. cap. 4 x 100 ml
Cat.-No. 01624

Swing-out rotor, 4-place, n= 5,000 min^-1, max. RCF 4,193
Cat.-No. 01494

Swing-out rotor, 4-place, n= 5000 min^-1, max. RCF 4,193
Cat.-No. 01494

Swing-out rotor, 4-place, n= 4,500 min^-1, max. RCF 3,260
Cat.-No. 01324

Swing-out rotor, 8-place, n= 4,000 min^-1, max. RCF 2,415, 90°
Cat.-No. 01611

Swing-out rotor, 12-place, n= 5,000 min^-1, max. RCF 4,193, 75°
Cat.-No. 01628

Swing-out rotor, 4-place, n= 4,500 min^-1, max. RCF 3,328, 90°
Cat.-No. 01554

Swing-out rotor, 6-place, n= 4,000 min^-1, RCF 2,701, 90°
Cat.-No. 01619

Swing-out rotor, 8- place,n= 5,000 min^-1, RCF 3,857, 45°
Cat.-No. 01617

Swing-out rotor, 4-place, n= 4,000 min^-1, RCF 1,896 90°
Cat.-No. 01645

Swing- out rotor, 2-place, n=4,000 min^-1, RCF 2,218,90°
Cat.-No 01460

Angle rotor, 8-place, n = 4.500 min^-1, max. RCF 3,305, 45°
Cat. No. 01418

Angle rotor, 6-place, n=9,000 min^-1, max. RCF 9,418, 35°
Cat. No. 01620A

Angle rotor, 12-place, n= 6,000 min^-1, max. RCF 4,146, 35°
Cat. No. 01613

Angle rotor, 12-place, n= 12,000 min^-1, max. RCF 16,582, 35°
Cat. No. 01615

Angle rotor, 24- place, n= 15,000 min^-1, max. RCF 21,382
Cat. No. 01420-B

Angle rotor, 30- place, n= 14,000 min^-1, max RCF 21,255
Cat. No. 01689-A

Swing-out rotor
Cat.-No. 01418

Swing-out rotor 4-place, 90°
Cat.-No. 01624

Swing-out rotor 4-place, 90°
Cat.-No. 01483A

Swing-out rotor, 8-place, 90°
Cat.-No. 01611

Swing-out rotor, 12-place
Cat.-No. 01628

Swing-out rotor, 8-place, 45°
Cat.-No. 01617

Swing-out rotor, 6-place, 90°
Cat.-No. 01619

Swing-out rotor, 6-place, 35°
Cat.-No. 01620A

Swing-out rotor, 12-place, 35°
Cat.-No. 01613

Cyto rotors, 4-place and 6-place suitable for C-28A

Angle rotor, 12-place
Cat. No. 01252-A

Angle rotor, 18-place
Cat. No. 01258-A

Angle rotor, 24-place
Cat. No.  01226-A

Angle rotor, 18-place
Cat. No.  01213-A
The special raised rim of the rotor 01213-A enables centrifugation with open tube lids.

Angle rotor, 24- place, 40°
Cat. No. 02424B

Angle rotor, 30- place, 45°
Cat. No. 02430B

Angle rotor, 24- place, 45°
Cat. No. 02428

Angle rotor, 30-place, 52,5° inner/40° outer
Cat. No. 02427A

Angle rotor,  32- place, 4x 8 for PCR tubes and strips, 45°
Cat. No. 02418A

Angle rotor, 20- place for cryo tubes, 40°
Cat. No. 02426B

Optional for rotor 02424B, 02430B, 02426B and 02427A

Hematocrit Centrifuge is used for determination of volume fractions of 
erythrocytes (Red blood cells) in blood and also for separation of micro blood 
and solutions.

 Product Features

• Brushless DC motor for maintenance free long life
• Precise RPM setting from 500 to 12000 with least count of 100 RPM
• Lid lock safety: Lid releases automatically after run completion
• Timer setting upto 12 minutes
• RPM & RCF toggles alternatively on the display during operation
• Large LCD display for easy setting and reading multiple parameters
• Small footprint saves valuable bench space

Standard Accessories

• Power Adaptor: Input Voltage: 100-240 V, 50/60 Hz 
                            Output Voltage: 24 V, 6 A
• 24 slot Capillary rotor (Pre-installed)
• Blood reader
• T - Allen wrench
• Product user manual and Warranty card