Water Stills

Stainless steel water still with thermostatic low water cut-off and level switch 
which activates the heater if there is enough level of water in the boiler.

Vertical water still with stainless steel boiler and borosilicate condenser.

Integrated low-water cut-off, water inlet & flow regulator, continuous production of high purity distilled water, free of metal ions, salts, dissolved gases and pyrogenic substances. With flow regulator to avoid excessive water consumption.

Vertical water still with 3 metalic heaters and a large surface condenser madeof borosilicate glass 3.3.
Designed for fully automatic operation, with an output of 10 liters per hour, includes safety features in case of lack of electricity supply or flow water supply.
Automatic operation because of an included reservoir level control. If the destilled water is supplied to an external reservoir or flask the level control will unplug the water still DEST 10L if the reservoir is full and start again if the water level has been reduced in the reservoir.

Stainless steel water still for automatic and continuous operation with built-in 8/16 l storage tank.
For bench and wall mounting. Supplied with wall mounting bracket. Excellent quality of distillation. An electronic level switch switches the still off when the storage tank is full and restarts it automatically when destilled water is withdrawn. Dispenser Tap of distilled water.
With flow regulator to avoid excessive water consumption.

BOECO BIDEST 4 is our Bidistiller designed to work automatically with a production of 4 liters per hour, includes several safety systems to work continuously.

• Produces distilled water for the most common applications in the laboratory.
• Boiler and Condenser are made of borosilicate glass 3.3, The heaters are sheated with quartz glass.
  This is ideal for producing high quality water, free of metal ions and pyrogens,
  with a conductivity 1-2 µS / cm.
• Incorporates several security systems for automatic operation: presostat, electrovalve and level sensor.
• Cooling water outlet by rubber tube. The condensed water not flowing through the cooling water outlet
• Energy saving through distillation of preheated cooling water.
• Distillation process visible through the front screen.
• The main switch and monitor drivers are on the front of the unit
• Control of water level automatic cut off power in case of lack of water
• Output of the distillate on the side of the unit.
• Output of carbon dioxide through hole of the top of condersers
• Suitable for wall mounting.

Safety systems

Preostat
Safety thermostat protects still in the event of water supply failure.

Electrovalve
It cuts water and electrical supply to avoid useless expenses of water and electricity.
It returns to open water inlet if the electrical supply is enough to let the water
still to work properly.

Level device
Device to fill a container without worrying when it finished. It cuts water and
electrical supply to avoid useless expenses of water and electricity.